The master CD or DVD disk, is the one you will
provide to your CD or DVD vendor for either
replication or duplication of the media. Below,
you will find some tips designed to help you
create a high quality master disc:

1. Always use the highest quality media that you
can obtain, as all media isn’t the same. Do
your research, take your time, then choose a
brand that will produce a high quality disc each
and every time you duplicate or replicate.

2. Avoid copying from a network source. If the
source files for your disk are on a network
drive, copy the files to your local disk before
you burn a disc. If you can’t move the files
to your local drive, try using the copy to hard
drive first feature. When doing this, your
burning software will create a temporary image
file during the burning process. Once the
burning has been completed, the temporary file
will be deleted.

3. You should always avoid burning on a laptop
computer that is running on low battery power.
The fluctations that will occur in the available
battery power may cause you to have poor results
in your duplication.

4. Always make sure that you finalize your
disc. If you fail to finalize, the disc won’t
play back. Finalizing will also help increase
the reading compability in other CD-ROM drives.

5. Never use the packet writing method to burn
a master disc. This method is very common with
burning drives that have re-writing capabilities.
This method will produce discs that can’t be
read on many CD-ROM drives.

6. Avoid any type of impact or movement of the
drive during burning. Doing so can cause the
laser to skip or jump tracks, which will lead
to errors or a bad disc.

7. If available, use the “burn-proof” feature.
This feature will allow the drive to slow
down the burn speed in the event the computer
can’t supply the data fast enough. Although
this can increase the burn time, the quality
of the disc will be much better.

8. You should avoid having multiple applications
open when burning, especially those that
access the Internet or a network. This can
hinder your computer’s ability to supply data
to the burner drive at the necessary rate.

If you follow the above tips, you should
produce a master disc of excellent quality. A
master disc is something you’ll want perfect,
which is why you shouldn’t take any risks.

“CD/DVD Master” is the disc you provide to your CD/DVD vendor for replication or duplication of that media. Here are some helpful tips for creating a high quality master:
Always use high quality media. All media is not the same. Do your research and choose a brand that will produce a high quality disc consistently.
Avoid burning from a network source. If your source files are on a network drive, copy the files to your local hard drive before burning a disc. If you cannot move the files to your local drive, please use the “Copy To Hard Drive First” feature. Your burning software will create a temporary image file during the burning process. When the burn is complete, the temporary file is deleted.
Avoid burning on a laptop computer running on battery power. Fluctuations in available power may yield poor results.
Always “Finalize” your disc. If you use the drag and drop interface that is built into some operating systems (Windows XP), be sure to select “finalize disc”. This will increase the “read” compatibility in other CD-ROM drives.
Don’t use packet-writing method to burn master disc. This method is most common with burner drives that have “re-write” capabilities. It is similar to the “drag-and-drop” method described above. This burn method produces discs that cannot be read on many CD-ROM drives. We cannot accept a master that is burned to a ReWritable (CD-/+RW or DVD+RW) disc.
Avoid impact or movement of the drive during burn. This can cause the laser to skip or jump a track, which will produce errors or a bad disc.
Use “burn-proof” feature if available. This feature allows the drive to slow down the burn speed in the event the computer cannot supply data fast enough. This can increase the total burn time, but the quality of the disc will be greater.
Avoid having multiple applications open when burning, especially those that access the internet or network. This can hinder your computer’s ability to “feed” data to the burner drive at the proper rate. Poor quality discs and burn rejects could be the result.
There are exceptions and variables to all the statements above. If you have any questions regarding how to burn your master, please contact the article writer.

The master of your CD or DVD disk, is of the utmost importance for replication or duplication. Here are some tips which may help you create a high quality master disc:

1. Always use the highest quality discs that you can obtain. Do your research, take your time, then choose a brand that will produce a high quality disc each and every time you duplicate or replicate.

2. Avoid copying from a network source if at all possible. If the source files for your disk are on a network drive then copy the files to your computer before you burn a disc. If you can’t, try using the copy to hard drive first feature. When doing this, your
burning software will create a temporary image file during the burning process. Once the burning has been completed, it will delete the temporary file.

3. Avoid burning on a laptop computer that is low on battery power. The fluctuations that will occur in the available battery power may cause poor results.

4. Ensure that you finalise your disc. If you fail to finalise, the disc may not play back. Finalising will also help increase the reading compability in other CD-ROM drives.

5. Never use the packet writing method to burn a master disc.

6. Avoid any type of impact or movement of the drive when burning. Movement can cause the laser to skip or jump tracks which in turn may lead to errors or a bad disc.

7. Use the “burn-proof” feature if possible. This will allow the drive to slow down the burn speed if your computer can’t supply data fast enough. It may increase the burn time but the quality of the disc will be enhanced.

8. Avoid having multiple applications open when burning. This can adversely affect your computer’s ability to supply data to the burner.